BUDFOL ANTYDROP

ACTIVE VAPOUR BARRIER

Intended for protection against moisture on sloping roofs. Thanks to the absorption layer, it delays the process of condensation while maintaining full protection of the roof’s thermal insulation. Mineral wool can be laid directly on Budfol Antydrop without additional reinforcement, which significantly reduces labor costs during roof insulation process.

THERMAL PROTECTION

The use of Budfol Antydrop in combination with a highly vapour permeable membrane guarantees full protection of the roof thermal layer.

ABSORPTION CAPACITY

Due to polipropylene non-woven layer, membrane has the ability to absorb moisture and thus delays the condensation.

PROTECTION AGAINST MOISTURE

Thanks to the use of polyethylene, which is characterized by low water vapour permeability, the film effectively protects the structure of walls and roofs from moisture.

PARAMETER
Thickness or Weight 100 g/m2 ± 10%
Service temperature range -30 ÷ 80°C
Tensile strength
– longitudinal
– transverse
≥130 N/50mm
≥80 N/50mm”
Sd-Value ok. 5m
Water resistance Watertightness at
2 kPa
Fire resistance Class F
Foil color yellow
Foil dimensions 1,5m x 50m

The offer also includes a reinforced version 220g/m2 with an increased absorption layer, recommended for climatic zones with large daily temperature differences.

MOUNTING & FASTENING

Subsequent strips of foil shall be mounted on the overlap, the size of which depends on the direction of laying – 15 cm for parallel laying and 20 cm for perpendicular laying to the rafters. The foil should be attached to the rafters with staples, and the overlapping strands should be tightly connected using double-sided Foliarex tape.

ATTACHED DOCUMENTS

✓ CE marking
✓ declaration of performance
✓ technical data sheet
✓ hygienic certificate
✓ REACH compliance declaration